Orlando Paint Correction Info


 



Your proper car care specialist. Brian Guy

Restorative Details and FULL PAINT CORRECTIONS

Paint correction is the process of machine polishing all imperfections completely out of the paint. A true Paint Correction will remove swirls, scratches, bird etchings, water marks, oxidation, orange peel, webbing, machine buffer trails, hologram effects and micro-marring from the vehicles top coat. By machine polishing the paint with various pads, compounds and polishes will leave the clear coat level and free from any imperfections. Ultimately your vehicle will look and feel better than the day you bought it. Heavily improving the exterior condition!
(minimum time needed for exterior paintwork; 12 hours)
Prices are based by hours, location, condition & treatments preformed
average base pricing ($480 - $1500 and up)
Ferrari F40 Paint Correction
______________________________________________________________________________

Above is a BMW hood (50/50) after re-leveling the paint by machine polishing.

Paintwork correction is carried out by a wide variety of polishing pads and the proper use of compounds and polishes. Removing medium and large scratches, heavy holograms(spider-webbing), swirl marks, hard water stains, Orange peel, D/A wet sand marks, etc by machine polishing.

All vehicles are tapped/masked where needed during the paint correction process to ensure the safety of all trim, rubber, clear film, lights, emblems etc.
LED’s and Halogen lights are used to simulate what the car would look like under the sun. As well as... Exposing all the damage (scratches etc.) during the paint correction process.
Paintwork assessment paintwork is measured on every panel. This will ensure how much paint we have to work with.
Step 1 – Thorough exterior wash | Paintwork decontamination is carried out by removing natural fall out particles & minerals such as iodine and iron metallic s. etc.
Step 2 – Paintwork correction is carried out by a wide variety of polishing pads and polishes removing medium and large scratches, heavy holograms, etc.
Step 3 – Paintwork Protection for top coat. varies waxes | sealants | nano/acrylic coatings
This heavily improves the exterior condition and protects better and longer

How does vehicle paint get like this?

BMW Z8 Paint Correction
  • Improper wash and dry
  • Dealership wipe downs
  • Dirty pads & bad buff jobs
  • Earths natural fallout's of oxidation & other contaminates
  • Transportation from time of build
  • Bad maintenance of wash mitts and towels
  • Driving debris

(“We do not provide same day service”. Please Schedule a head of time. Thank You!)
OUR GOAL.
Each step of this detail is thoroughly involved over the whole car. Searching for factory & dealership defects. With this detail you’ll also get a free full assessment of anything that may or may not be an issue. We’ll properly protect each piece of material with proper product and technique. Thus giving a proud car owner a full understanding of the vehicles condition. In between the lines in the bullets above… “Is skill and knowledge”!
ITS A BRAND NEW CAR?
Vehicles go through a build process… Then transportation to the dealer… (trailer, boat, train etc…) Where most often they set on lots & showrooms and often times being subjected to improper washes and wipe downs… With all the element vehicles go through before ever being protected… “Properly” It is the best way to protect your investment and save some coin down the road! Just because its new doesn’t mean its right.
CARS THAT SIT ON LOTS SUFFER THE MOST ABUSE.
Out in the elements subjected to natural fallout, UV, oxidation and other airborne particles….  Maybe a weekly wipe down or two… Hopefully with a clean cloth/towel…? All Unprotected. Just a few things to consider when picking up a new car. How long has it been there before you bought it? Or how many dealers have passed it along prior to purchase? A AOWheels New car prep detail will provide confidence and a reassurance in your vehicles condition.
NEW CAR PREPS FOR EXOTICS.
Most all exotics are factory wet sanded in the production process. Nine times out of ten there will be a few if not many… D/A wet sand marks left in the paint. Paint Correction and proper leveling will be needed in those problem areas. Please refer to our paint correction service.

Comments

Popular Posts